Today only (Stupid Deal of the Day)
https://www.musiciansfr
The AT-LP2X combines hi-fi features in a stylish design to deliver stunning sonic quality at a great price. It is perfect if you’re looking for an automatic turntable that will grow with your needs as you build out the perfect home stereo system. It boasts ease-of-use, performance, affordability and options to add-on or upgrade the turntable’s key features.
The AT-LP2X is a fully automatic belt-drive turntable with switchable controls to play 12" and 7" vinyl records at one of two speeds—33-1/3 and 45 RPM. Being fully automatic, starting and stopping your records is done simply by pressing the START and STOP buttons on the front of the player. With these controls, you won’t need to manually lift the needle to play your favorite music—the buttons will automatically lift and place the tonearm. Should you wish to do it manually, however, a hydraulically-damped lift control allows the stylus to be precisely and safely lowered and raised at any point on the record.
The AT-LP2X’s balanced straight tone arm comes with a 1/2" mount universal headshell and Audio-Technica’s AT91R Dual Moving Magnet phono cartridge with the option to switch it out for other moving magnet or moving coil cartridges. This is all to give you an excellent, high-fidelity listening experience and the flexibility to upgrade. It has an anti-resonance, die-cast aluminum platter with a felt mat; boasts a damped base construction for reduced low-frequency feedback; and includes a 45 RPM adapter and hinged, clear-smoked, dust cover.
On the back of AT-LP2X is a PHONO/LINE switch; an attached dual-RCA output cable; and an AC input to connect the included power cable. Depending on your setup, switch the PHONO/LINE switch to LINE when you are using the AT-LP2X with a stereo preamp, or to PHONO—which will turn on the internal preamp—when you are connected directly to speakers.
FEATURES
Fully-automatic belt-drive turntable
Two speeds: 33-1/3, 45 RPM
Balanced straight tone arm with hydraulically damped lift control and tone armrest
Built-in switchable PHONO/LINE pre-amplifier
Attached dual-RCA output cable
½" mount universal BLACK headshell
AT91R Dual Moving Magnet RED phono cartridge and long-life diamond stylus
Anti-resonance, die-cast aluminum platter with felt mat.
Damped base construction for reduced low-frequency feedback coloration
Includes 45 RPM adapter and removable hinged smoked dust cover
Call or click to order today.
SPECIFICATIONS
Type:
Belt-drive turntable, fully automatic
Motor:
DC servo-controlled
Speeds:
33-1/3 RPM, 45 RPM
Turntable Platter:
Die-cast aluminum
Wow and Flutter:
Less than 0.25% (WTD) @ 3 kHz (JIS)
Signal-to-Noise Ratio:
>50 dB (DIN-B)
Output Level:
Pre-amp "PHONO": 1.5-3.6 mV nominal at 1 kHz, 5 cm/sec
Pre-amp "LINE":
129-313 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain:
36 dB nominal, RIAA equalized
Power Supply Requirements:
120V AC, 60 Hz
Dimensions:
17.1" W x 5.0" H x 13.8" D
Weight:
11.5 lbs.
Accessories Included:
AT91R Dual Moving Magnet RED stereo cartridge with a replaceable stylus; 1/2" mount universal headshell; power cord; 45 RPM adapter; removable hinged dust cover; 4 mm felt
Iconic One Theme | Powered by Wordpress